Action Parts
Cat No.	Product		Application
41	Upright lever Bodies
42	Jacks for Upright lever Bodies
43 A	Upright Butts with Flanges (without plate)
43 B	Upright Butts with Flanges (with plate)
43 C	Butt plates & screws only
44 A	Upright Flanges Butt
44 B	Upright Flanges Butt
44 C	Upright Flanges Lever
44 D	Upright Flanges Lever
44 E	Upright Flanges Damper
44 F	Upright Flanges Lever
45 A	Upright Hammer Shanks 5 mm
45 B	Upright Hammer Shanks 5.5 mm
45 C	Upright Hammer Shanks 6 mm
46	Upright Set off Buttons
298 A	Damper Lever Bodies Middle section
298 B	Damper Lever Bodies Bass section
299 A	Damper Drums 8 mm 0 x 13 mm high
299 B	Damper Drums 10 mm 0 x 14mm high
299 C	Damper Drums 10 mm 0 x 19 mm high
71	Action Bolts with nuts
71 A	Nuts only for Action Bolts

Action Parts
Cat No.	Product	Quantity	Application
72 S	Spiral Jack Springs 16 mm 19 mm 22 mm	set of 90
72 T	Spiral Jack Springs 16 mm 19 mm 22 mm	packets of 1000
73	Costa Jack Springs 48 mm 51mm	set of 90
74	Butt Spring (with left or right coil)	set of 90
75 A	Damper Springs Bass = 0.90 mm Middle = 0.80 mm Treble = 0.70 mm	packets of 1000
75 B	Damper Springs Graded for bass30 Middle 26 and Treble 16	in set
102	Jack Check Rail (right & left) Screws
103	Set off Screw 25mm
104	Set off (Escapement) Rail Brackets
105	Check Wires
106	Tie (tape ) Wires
107	Damper Spoons

Grand Action Parts
Cat No.	Product	Quantity	Application
47	Grand Lever Bodies
48 A	Grand Jaks Standard Patten
48 B	Grand Jaks StennwayPatten
48 C	Grand Jak Regulating Screws Only
49 A	Grand Hammer Shanks With Roller but without flange, standerd
49 B	Grand Hammer Shanks With Roller & flange Fitted standerd
49 C	Grand Hammer Shanks With Roller & flange Fitted For Steinway
49	Grand Hammer Shanks For pre-1918 Bluthner
50 A	Grand Flanges Standard Patten
50 B	Grand Flanges Escapement screw only (drop screw)
51 A	Grand Rollers Standard (Japanese) 10mm
51 B	Grand Rollers Abel 10mm
51 C	Grand Rollers Abel 9 mm
51 D	Grand Rollers Abel 8 mm
76	Grand Single Winged Springs,	Sets
77	Grand Double Winged Springs,	Sets
80	Bluthner Grand Action Standards For older Bluthner Grands,
76	Grand Damper Wires,

Go To Top

Center pins
Cat No.	Product	mm
83	No 22.1/2,	1.25 mm
83	No 23,	1.275 mm
83	No 23.1/2,	1.30 mm
83	No 24.	1.35 mm
83	No 24.1/2,	1.40 mm
83	No 25,	1.45 mm
83	No 25.1/2,	1.50 mm
83	No 26.,	1.55 mm
Stock units are 100g. 300g 500g or any larger quantity